Recent content by Rock It

  1. Rock It

    Front Rotor Freeplay Concern

    Wow you carry an extra caliper? Have you ever had to use it? Thanks for the detailed instructions. Is this the grease you use? Brembo G00075 B-Quiet Brake Grease Lubricant 75g
  2. Rock It

    Front Rotor Freeplay Concern

    Thanks mate. Just one more question. When you say "to expose the area that hides behind the seals. About 3mm". Is this done by applying some brake pressure and using the fluid to push the piston out or do you do it by hand/tool?
  3. Rock It

    Front Rotor Freeplay Concern

    I actually had my brake fluid replaced the other day which is why I don't want to risk air getting in there.
  4. Rock It

    Front Rotor Freeplay Concern

    Might be a silly question but I'll ask anyway. After you extrude the pistons, does this mean that I'll need to bleed the brakes to get rid of air in the lines?
  5. Rock It

    Auto canceling turn signal upgrade

    Thanks mate, you've been very helpful. Hope you have a great day/night.
  6. Rock It

    Break-in period/limited power?

    That's what I thought you were asking.
  7. Rock It

    Auto canceling turn signal upgrade

    Can you tell me where the flasher unit is on our bikes? It looks like I need to check if I have a 2 or 3 prong flasher.
  8. Rock It

    Auto canceling turn signal upgrade

    Thanks much appreciated. I had a Harley before the Rocket and I've always said the only thing I miss about it is the auto cancelling signals.
  9. Rock It

    Front Rotor Freeplay Concern

    Yes I did the same thing and it got rid of the pulse as well. I used brake cleaner spray though and spun the disc against some wet and dry sandpaper before replacing the pads.
  10. Rock It

    Auto canceling turn signal upgrade

    Hi, I have a 2012 Roadster. I just googled Signalminder and the video is for installation on a Vespa LOL, (probably the other side of the spectrum to the Rocket) And on the Procycle website it says that the SignalMinder unit is designed as a plug-in accessory for many Japanese bikes. Is this the...
  11. Rock It

    Machine Brake Rotors

    Thanks I saw another one too after I read John Miller's post but I'll check this one out too. Cheers
  12. Rock It

    Front brake rotor replacement.

    Cheers I'll try that.
  13. Rock It

    Machine Brake Rotors

    Thanks read it but couldn't see anything about using a drill. I've asked him a question to see if he can explain how he got behind the buttons to remove grit.
  14. Rock It

    Front Rotor Freeplay Concern

    Hi, did you remove the disc buttons or did you clean them while still attached to the disc? Was the sand paper wet when you deglazed the disc?
  15. Rock It

    Front brake rotor replacement.

    I'm getting that shaking and grab and release feel. Why do you think it is? I'm thinking I should machine the rotor of replace them.
See more
Back
Top