mo8414's latest activity
-
Time to tell the tell I have ran the Avon for years and once even brought it back up after the bike was sliding on the frame. I love my... -
mo8414 replied to the thread Din plug tip.Its almost like its made to hold a O ring with the way its shaped.
-
Yes I used an O ring pick to lift the copper tabs just as you've done. Your pic shows it perfectly. Good on ya!!
-
For once I forgot to record my mileage when I mounted that Elite, but it wore faster than anything and unevenly. I suspect it was 3k to...
-
I bit the bullet for one recently too. So far, really liking it. I used to run it on the Roadster III I had.
-
I think the set of Bridgestones cost about $425 from Rocky mountain ATVMC. Rear seems good so far
-
that is a Bridgestone G701 i just installed one on my 07 and it seems to ride good. the question is will it scrape the floorboards or...
-
That Dunlop Elite 4 I just ordered is $350, hope it sticks.
-
Bridgstone Exedra G 701. It was the mate for the rear. I don't have any experience with tires for these bikes, so I'm just trying them...
-
finally put the front on. Made axel "tool".
-
I solved mine partially by bending the radial contacts on the plug outward, but mainly by bending the socket's contacts for the axial...
-
mo8414 replied to the thread Din plug tip.So I tried the O ring trick and it seems to work very well, thanks for the suggestion. I had to use a small pick to pry up the copper...
-
-
mo8414 replied to the thread Din plug tip.Good tip. My adapter has a cap on it so I put my adapters cap inline with the DIN cap and they hold eachother tight.
-
I thought I'd share this tip with you all, seeing as how it works. I've had instances of a DIN plug not connecting securely...
-
mo8414 reacted to A1A Rider's post in the thread I have a Storm '25 model and ordered BT Moto ECU read/write gadget with
Like.
I think, didn't try yet, when one submits the original ecu file, there is a questionnaire. Once I'll do that step, I'll take screenshot...
