Recent content by jetbuilder

  1. Rattley, Tinkley Sound

    My screen in front of the radiator gives a rattle on rough roads.

  2. What, Why, How?

    F**kin vacuum hose is right.

  3. What, Why, How?

    Ok friends, I'm getting ready to jump into the remapping of my R3 standard and the tune posts have me boggled. I'm going to be running 06 R3 with TORS, Secondary's removed, Tri K&N, O2 removed. Can I retune my bike for this configuration with just the ECU source and a premade map, or do I have...

  4. Purge Canister

    The manual says the charcoal canister and pruge valve are on California models only but my 06 R3 was bought new in Kansas and has this set up. Just wondering if anyone knows if they started installing it on all US models or if my R was a California bike.

  5. Won't Start

    Problem Solved : ) Had time in the shop today and my tune cable hasn't arrived yet so I started with swapping out the relay's, this didn't work. Next I started pin testing all the sensors started at the crank sensor and went foward all the way to the MAP sensor. When I took ahold of the map...

  6. 3 K&N ,TORS, No Cat

    looking for a tune that can be loaded via ECU source

  7. suggested tools to take on the road

    One of the simplest life saving devices you can carry is a reflective vest. It 's cheap and can be packed away anywhere. Take it from a fire fighter the side of the road is a very dangerous place day or nite. In a video test at my department we also discoverd that the white reflective material...

  8. 3 K&N ,TORS, No Cat

    I've got an 06 R3 with TORS and Cat. removed. I would like to add triple K&N's if some one can sujest a map for this set up I would be greatful.

  9. My Rocket is finally a Triumph

    Had the tank o-rings replaced at 3000 miles, no more problems.

  10. Won't Start

    Back At IT Well the dealer is 2 weeks behind so I'm back in the shop, not able to let it lie. Does anyone know what the cranking rpm should be from the starter? It seems to be cranking slow (the battery is good) but I can't find a starter test in the manual unless it's tested with the...

  11. Won't Start

    went back to step one today. Removed the tank and double and triple checked all ele. connectors. Pulled plugs and checked for spark, it was intermittent. Ohm checked plug wires and they were good. Checked voltage to coils and it was good. So I'm assuming if the coils are getting power but no...

  12. Won't Start

    I removed my tank yesterday to find out that the dealer had left my air box uncoupled. So I removed the entire air intake system and cleaned it out with a rag soaked in carb cleaner. While I was there I installed new plugs. Now despite cycling the switch to build fuel pressure several times the...
See more
Back
Top