Itomis's latest activity
-
Itomis replied to the thread Voltage, fuel, clock, temperature indicator for Rocket III 2006..It is inconvenient to fit all the information on one display. The text is too small. I decided to order another display. One will show... -
-
Itomis posted the thread Voltage, fuel, clock, temperature indicator for Rocket III 2006. in General Tech Talk.I did not find the standard optional devices showing the fuel level and clock. In any case, I am not satisfied that these devices show...
-
-
Itomis replied to the thread electical problem.I've swapped the relays before, has anything changed? I also tend to believe that there is a bad contact somewhere. All that remains is...
-
Thanks for your suggestions guys all good points to help solve the problem . Was workin today so no time to look . Herman fuse 30 looks...
-
forget about the way the manual says to check the circuit in the beginning you said (thought i had bad ign no power that will set the...
-
Itomis replied to the thread electical problem.It turns out that everything is there without a relay, if you plug it in, the voltage is gone. We need to look at where the voltage drop...
-
I'm guessing this is an issue that is uniquely mine, but I thought I'd see if anyone else has had this. My bike has a audible vibration...
-
Itomis replied to the thread electical problem.It remains to check the integrity of the wire from the ECU to the relay. First, check for proper functioning, and then check for a short...
-
-
Itomis replied to the thread electical problem.Check the fuel pump relay for proper operation. Also, use a multimeter to check the power supply to the relay. Two of the four contacts...
-
-
Greetings to all! I live in Siberia near Lake Baikal. I added Rocket III to my collection. I use it for city trips and long-distance...
-
-
Itomis replied to the thread Help taking the engine out, no idea how honestly.It's difficult to confuse the connectors, as they are not compatible or the wires are not sufficient. Everything fits in its place...
-
Itomis replied to the thread Help taking the engine out, no idea how honestly.I did this procedure with my bike when I was changing the damper shaft bearing. You can find out how to do this by clicking on the link...
-
