Gerald's latest activity

  • Gerald reacted to TURBO200R4's post in the thread Chasing gremlins with Like Like.
    well the air intake pipe should not make a difference other that sound when you open the throttle. the two bottom oxygen info is off the...
  • Gerald reacted to dougl's post in the thread Chasing gremlins with Like Like.
    It would be nice to load the stock tune
  • Gerald reacted to loudjosh's post in the thread Chasing gremlins with Like Like.
    This could explain the rather choppy idle and inability to stay at 850. It's also backfiring badly through the throttle bodies. It did...
  • Gerald reacted to dougl's post in the thread Chasing gremlins with Like Like.
    Looks better! The throttle bodies are significantly out of balance. The differences should be no more than 10hPa.
  • Gerald reacted to loudjosh's post in the thread Chasing gremlins with Like Like.
    Quick update. . . Lifted the tank and one vac hose was disconnected and the intake from under the seat was disconnected from the large...
  • Gerald reacted to atomsplitter's post in the thread Chasing gremlins with Like Like.
    So based on this analysis it's probably a combination of problems, starting with mainfold air pressure and injector pulse timing. The...
  • Gerald reacted to TURBO200R4's post in the thread Chasing gremlins with Like Like.
    i will try to answer this with the stepper motor retracted the throttle plates go to almost a closed position (if someone hasn't mucked...
  • Gerald reacted to Journeyman's post in the thread Chasing gremlins with Like Like.
    Once the bike has warmed up the stepper motor is no longer in play, is my understanding. So, I think the vacuum leak and/or fuel filter...
  • Gerald reacted to dougl's post in the thread Chasing gremlins with Like Like.
    At idle, the mixture is controlled by the stepper motor through the isc valve, no?
  • Gerald reacted to loudjosh's post in the thread Chasing gremlins with Like Like.
    I adjusted everything the tuneecu would let me adjust, so far. When I get home I'll be doing more
  • Gerald reacted to R-III-R Turbo's post in the thread Chasing gremlins with Like Like.
    On the contrary. This is a myth. A stock bike idling should be in the 600s iirc. 900s is getting close to atmospheric pressure. 900s are...
  • Gerald reacted to dougl's post in the thread Chasing gremlins with Like Like.
    You need the cable to load maps.
  • Gerald reacted to dougl's post in the thread Chasing gremlins with Like Like.
    There’s an adjust iscv thing I believe under tests.
  • Gerald reacted to loudjosh's post in the thread Chasing gremlins with Like Like.
    I'll get the vin when I'm home. I'll have the proper Bluetooth dongle tomorrow, in order to load the new maps.
  • Gerald reacted to dougl's post in the thread Chasing gremlins with Like Like.
    If they’re the same at idle (value doesn’t matter) there’s probably no leak. Don’t know about fuel pump but look into the idle stepper...
Show older items
Back
Top