Recent content by ExtremeAntics

  1. ExtremeAntics

    Bluetooth

    There was an ECU update that resolved a number of issues with the BT module, however to get the bike controls to work correctly you will need to connect your phone and Sena to the bike and not have Sena connected directly to your phone.
  2. ExtremeAntics

    Replaced my mirrors today

    I was lucky enough to find these, they are an original Triumph mirror similar to what you used to be able to get for a Speed Triple. For a smaller mirror they have really good optics and zero vibration.
  3. ExtremeAntics

    Alternative to Factory Panniers

    I ended up getting some custom mounts made based on SW-Motech’s bag mounting system. They mount to the bike in the same way as the H&B C-Bow system. Done out of chromoly for extra strength.
  4. ExtremeAntics

    Removing Air filter housing cover?

    You need to lift the outside to clear the bolts then slide towards the rear of the bike from memory, is a lot easier if you can remove the tank.
  5. ExtremeAntics

    SERVICE WRENCH AFTER BATTERY DISCONNECTED

    Did you check that your date hadn’t reset when you had the battery disconnected?
  6. ExtremeAntics

    What helmet do you use on your Rocket?

    New Bell Racestar Flex DLX on the left replacing the old Bell. Also have the Shoei J-Cruise II
  7. ExtremeAntics

    Aftermarket Clutch brake lever

    +1 AVDB shorties.
  8. ExtremeAntics

    New lid

    New lid arrived today, time to retire the old Bell to the display shelf.
  9. ExtremeAntics

    Air Filter Change

    Just did this one myself, **** this was an absolute pain in the ass. Trying to get the air cleaner back in was the worst. There is a small gap where the clip slots in towards the front of the bike. I ended up filing the clips on the air cleaner holder down to a wedge that made the insertion 10...
  10. ExtremeAntics

    Crash bars, engine guards, sliders Rocket 3 R/ GT

    This is the same way that the dresser bars were mounted on the first generation Rockets.
  11. ExtremeAntics

    Finished my rear rack and panniers.

    This image shows the threaded sleeves coming through the trim.
  12. ExtremeAntics

    Finished my rear rack and panniers.

    If your referring to the rack over the guard, I’m running a stainless threaded sleeve up through the silver trim on the back that are also the nuts for the pannier brackets. From there I have a custom stainless cage to keep the rack off the fender and then bolt the stock luggage rack to the...
  13. ExtremeAntics

    Mounting / dismounting

    Not having the pillion rack on the back makes things easier.
  14. ExtremeAntics

    Finished my rear rack and panniers.

    The racks are custom, built on the same mounting method as the Hepco & Becker panniers however I have modified these with the SW-Motech mounting hardware. To this I have mounted Burley Brand bags to round out the look.
  15. ExtremeAntics

    Problem w oem heated grips

    I didn’t need to go to the dealer when I did mine.
See more
Back
Top