Recent content by edgeofsanity

  1. edgeofsanity

    Rocket 3R Sport Rider Seat Infill

    It's damaged, I recommend replacing it with the carbon fiber tail 😆
  2. edgeofsanity

    Power commander 6 install on 2021 rocket 3 GT lost ignition maseter switch

    Pretty sure you did not grab the wire from the master on/ off switch; otherwise your bike would not be starting, unless you re-wired that harness. From what you described you grabbed the auxiliary harness meant to wire up the din port
  3. edgeofsanity

    Garage Door Remote

    I have the doormate 2 also, but I have it oriented down to keep it more hidden so it doesn't work as well as it should. My other bike is a Sportster fitted with the HD garage door opener. So this past weekend I got another transmitter and did some backyard engineering, and viola! i can now flash...
  4. edgeofsanity

    What do you think about the riding modes? Do you find them useful?

    Does custom truly shut off traction control? Or is it just dialed all the way down? Sport mode from day 1 for me. Haven't tried custom yet...but I'd have to admit the traction control most likely saved me the over day coming out of a turn too happy on the throttle
  5. edgeofsanity

    Switched wire to tap into

    I have a healtech, but used the acc. switch to bypass auto off. I found this plug and tapped into it to avoid cutting into any wires. It's on the left side, hidden along the edge. Probably plug for Bluetooth? 🤔 Anyways, it's just capped off on mine. Just de-pin the acc wire, and plug your wire...
  6. edgeofsanity

    Found a way to keep the radiator heat from cooking my lower leg

    That is ugly, might as well just get some chaps. Or kevlar jeans...and add a kevlar heat liner patched on the inside of the pant leg
  7. edgeofsanity

    2020-2025 tanks.

    Should be the same; I saw those covers also. Let us know how it turns out. I was thinking about getting the cover to paint it. Would be alot easier and less hassle than pulling the tank to paint
  8. edgeofsanity

    DIY Side Mount Plate From Two Cheap Kits

    nice, wish we can do vertical side plates in cali
  9. edgeofsanity

    21in front wheel.

    unrelated to your question, but where did you hide the electronics that was behind the side cover. I'm thinking about taking the side cover off too, but haven't really looked at it closely to see where the electric wires/modules can be tucked away at
  10. edgeofsanity

    Anyone have a black bezel? Update, got it and thank you!

    just paint them:
  11. edgeofsanity

    RPM limit not increasing.

    Didn't go deep enough into Mexico to be able to find out...only 2nd, shut it down towards top of 3rd 😇
  12. edgeofsanity

    RPM limit not increasing.

    Just got back from Mexico a few minutes ago. Redline will still read 6.5, but rev limiter did not kick in until about 7.4
  13. edgeofsanity

    RPM limit not increasing.

    Now you got me curious. I just flashed mine too. And the redline is still at 6.5, but I think I went past it without rev limiter kicking in on the first outting afterwards. I gotta go to Mexico later and check it out...
  14. edgeofsanity

    help with rear cowl removal

    After much frustration with removal of the rear cowl; finally got it all done. Tried to wrap the front fly screen but failed
  15. edgeofsanity

    help with rear cowl removal

    Yes the storage pocket needs to be removed to expose the one bolt holding the cowl to the brake light fixture.
See more
Back
Top