bebsy's latest activity

  • bebsy
    bebsy replied to the thread 2nd Gear Slop.
    Does anybody have the part number for the latest 8 dog version for 2nd gear, being that T1180444 is the only one listed in the Triumph...
  • bebsy
    bebsy reacted to Tripps's post in the thread 2nd Gear Slop with Like Like.
    Just saw this, nobody answered? Rounded dogs will allow it to slip, then catch, not sure what you mean by slop?
  • bebsy
    bebsy reacted to Kevin frazier's post in the thread 2nd Gear Slop with Like Like.
    Order new year, all the same, the new dogs have more teeth, that’s probably all you can get now. If youre going into trans, maybe...
  • bebsy
    bebsy reacted to R-III-R Turbo's post in the thread 2nd Gear Slop with Like Like.
  • bebsy
    bebsy replied to the thread 2nd Gear Slop.
    Hello Tripps Sorry for the late reply, with this being an old post and job now completed thanks to some use full help from R111 turbo...
  • bebsy
    bebsy reacted to warp9.9's post in the thread Inexpensive Starter Replacement with Like Like.
    Thats great Wayne, in the part numbers above 1.4kw - part number 280-0283 or 280-0278 what is the difference between the two numbers...
  • bebsy
    bebsy reacted to Power-Tripp's post in the thread Inexpensive Starter Replacement with Like Like.
    The correct part number is 280-0174 from eBay, Advance auto, etc in USA. From a 1999 Toyota Solara 2.2L with 5SFE motor. Details are in...
  • bebsy
    bebsy reacted to Kevin frazier's post in the thread Clutch lifter spacer?? with Like Like.
    It works fine with just wavy washer, the important thing is after you tighten clutch plate you have 3 to 6 mm of free-play on the lifter...
  • bebsy
    bebsy reacted to wjb's post in the thread Clutch lifter spacer?? with Like Like.
  • bebsy
    bebsy reacted to wjb's post in the thread Clutch lifter spacer?? with Like Like.
    Well, here's my theory. Somewhere along the way Triumph revised the lifter piece. The original design had a narrow shoulder that used a...
  • bebsy
    bebsy replied to the thread Clutch lifter spacer??.
    Cheers for that I came across turbos post before but they didn't have the washers attached but a nice comparison all the same, to be...
  • bebsy
    bebsy posted the thread Clutch lifter spacer?? in General Tech Talk.
    Evenin all I'm just finishing putting this motor back together all parts were boxed separately I'm left wandering as looking at the...
    • IMG_20250423_171937.jpg
    • Screenshot_20250423_181301.jpg
Show older items
Back
Top