bebsy's latest activity
-
bebsy replied to the thread Helicoil blues.Thanks to all that posted and a big shout out to turbo200r4 for the pause!! and helpfull pointers, I squared the motor up and inserted... -
Its called a "Direct Connection." When you rely on a Chassis as 1/2 of a Battery Connection/Circuit, you're inducing resistance into...
-
The one I use has 8threads but it does not matter When you Tap till it gets tight (as far as you can tap I would grind the tap 1/16 so...
-
bebsy replied to the thread Helicoil blues.That sounds doable I was thinking it had to be as deep as possible and the worry was having room to break that tang off, that's taken...
-
The one I use has 8threads but it does not matter When you Tap till it gets tight (as far as you can get) then (I would recommend)...
-
1) I usually measure the depth of the hole then: 2) Transfer that measurement to a drill bit and; 3) Mark the length/depth on drill bit...
-
bebsy replied to the thread Helicoil blues.
-
-
Metric helicoils is harder to install than stander threads A few pointers I would would have the one insta Put two bolts (closest to...
-
bebsy replied to the thread Helicoil blues.I have ordered a kit the helicoil come with a tang which requires leaving a required gap at the bottom when inserted to allow it to be...
-
The proper way to fix this problem This info is wrong Earlier I typed about 3 paragraphs and managed to lose it all but having the...
-
bebsy replied to the thread Helicoil blues.Thanks Turbo for the confirmation you done plenty to help I can get that said kit here cheers 🍻
-
Usually it is simple if u know what you are doing but on the rocket starter that thread is on the engine block. It goes thru the starter...
-
You might be in a world of crap If what I think is going on I am going to need you to answer every question the best that you can. When...
-
bebsy replied to the thread Helicoil blues.Well here's a well thought out explanation one of which I've never been in the habit of. I only fitted the engine 2 day's ago and...
