atomsplitter's latest activity

  • atomsplitter
    atomsplitter replied to the thread Remap?.
    No remapping is necessary if you just want all the power that's been restricted by simply changing the settings for throttle settings in...
  • atomsplitter
    Improper suspension setup can also affect your wear pattern. Try increasing your rear shock preload 4 or 5 turns and then back off the...
  • atomsplitter
    atomsplitter replied to the thread Hill Hold feature.
    Oh yeah? How bout paving that?
    • 1748530972339.png
  • atomsplitter
    atomsplitter replied to the thread Hilarious Yammie Noob.
    I went a slightly different route (same great 100 mph in 1st gear):
    • 1748523365843.jpeg
  • atomsplitter
    atomsplitter replied to the thread Hill Hold feature.
    It works the same on my Lexus LS, push a button and you don't need the brake pedal anymore when stopped to keep from rolling.
  • atomsplitter
    atomsplitter replied to the thread Any Riders In Switzerland.
    Apoparently not. Welcome to the forum from sunny North Texas.
  • atomsplitter
    atomsplitter replied to the thread New to R3.
    Greetings from sunny North Texas. The joys of working on any motorcycle require a little give and take, you give effort and take the...
  • atomsplitter
    atomsplitter replied to the thread Mass air sensor.
    Ideally you want to probably secure that sensor to the framework above the engine to give it the coldest air possible. The colder it is...
  • atomsplitter
    atomsplitter replied to the thread Red Line at Startup.
    One of the Great Minds of our time:
    • 1748462390938.png
  • atomsplitter
    atomsplitter replied to the thread Hill Hold feature.
    Short answer, "BRILLIANTLY." After replying to this thread it made me curious enough to see if I had that little nugget on my '23 GT...
  • atomsplitter
    atomsplitter reacted to TURBO200R4's post in the thread Red Line at Startup with Like Like.
    While tps is a good possibility for high revs and the tps sensor is made so it will not jam the throttle I am leaning towards the gismo...
  • atomsplitter
    atomsplitter replied to the thread Red Line at Startup.
    Turbo brings up a good point, where the throttle cables come in make sure those linkages are well lubricated and clean (and lube the...
  • atomsplitter
    atomsplitter replied to the thread Red Line at Startup.
    Like the government, "we're here to help."
  • atomsplitter
    atomsplitter replied to the thread Red Line at Startup.
    Disconnecting that sensor's input to the EFI sets voltage at 0. Using TuneECU the OBD reader is connected to the ECU, you'll see what...
  • atomsplitter
    atomsplitter replied to the thread Red Line at Startup.
    You just need to hook up TuneECU and it'll show what you are getting for TPS voltage. Watch the video it explains BOTH the android and...
Back
Top