atomsplitter's latest activity

  • atomsplitter
    atomsplitter replied to the thread Bleeding Brakes.
    If you got some air out of the banjo you probably have air trapped in the pump piston area. If you still have the 4-position lever...
  • atomsplitter
    atomsplitter replied to the thread Bleeding Brakes.
    One more note, make sure you maintain your reservoir level between upper and lower level marks when bleeding to prevent air being sucked in.
  • atomsplitter
    atomsplitter replied to the thread Bleeding Brakes.
    The spongy feeling at the lever is air in the system. Here's another trick I've used. Take a squirt bottle spritzer and rubber band...
  • atomsplitter
    atomsplitter replied to the thread Bleeding Brakes.
    When you release the lever on the bar do so slooooowly. It will prevent air induction. Also try letting the system sit for a day to...
  • atomsplitter
    atomsplitter replied to the thread Bleeding Brakes.
    If you have a bleed nipple on the reservoir perch, you need to bleed that as well. My sons-in-law's Speed Triple had the same problem...
  • atomsplitter
    atomsplitter replied to the thread Does ride modes work still?.
    Depending on what you changed the ride modes aren't usually affected. The ETV tables have 3 listings (1,2, and 3) number 1 is rain, 2...
  • atomsplitter
    atomsplitter replied to the thread My pipe is the biggest.
    It only gets 9mpg on diesel and has a small fuel tank. Have fun for a few miles then look for a gas station............
  • atomsplitter
    Always complete your thought to avoid confusion, "Hun pass me the hammer, I have a stripped pilot jet...."
  • atomsplitter
    Greetings from sunny North Texas. If you live near Seattle, it's rainy there most of the year (my sister lives in Everett).
  • atomsplitter
    You should read the book pictured in my avatar, sounds like you're using my maintenance methodology. Disassemble to explosion point...
  • atomsplitter
    If you had that spring reversed, you can't get any fluid down the lines. If you look at the holes at the bottom of the reservoir and...
  • atomsplitter
    Try this, fill the reservoir to the upper mark and cap. Let sit for 24 hours and then check fluid level. If it's the same level after...
  • atomsplitter
    atomsplitter replied to the thread She lives.
    Nothing beats excess, congratulations!
  • atomsplitter
    atomsplitter replied to the thread Is this normal wear?.
    The compound distribution in the tire can also affect how fast it wears. The softer stuff is usually on the outside of the tread where...
  • atomsplitter
    atomsplitter replied to the thread TPMS Problem.
    The simplest answer is to simply turn it off if you can. The problems you describe are known by the factory. You might have your...
Back
Top