Wiring/Harness part #

Jan Udholm

.020 Over
Joined
Apr 25, 2008
Messages
28
Hello all.
I am putting hitch on my rocket, and I am not very happy
with cutting the OEM wiring harness.
I will order replacement wiring/harness instead.
Under the right side panel, I have found all the wiring needed
to connect the hitch/trailer, and all is nicely plugged together,
( rear light, stop light, LH side indicator,RH side indicator and licence plate light )
So far I have ordered the wires/harness to the rear/stop light and the licenceplate light.
But my Triumph dealer can´t find, the 2 wires for the RH and LH side indicator harness.

What part # do they have ?
Is it possible to get them at all ?
Have anybody seen the 2 wires in a drawing ?

I have looked in the manual, and there is nothing to see.
I really hope that you can help.
Thank you
jan:)
 
You could save yourself a lot of time and use the blue 3M wire tapping splices. Thats what I use for my trailer. It doesnt cut the original harness, just taps into it using small metal clips and then a plastic cover over the splice. When you take the splice out the wire is still intact.

Heres a link to show what they look like
18-14 fem.T-tap discon/50 - T-Tap Disconnects
 
Last edited:
Back
Top