Power-Tripp

Turbocharged
Joined
Apr 7, 2009
Messages
538
Location
Birmingham, AL, USA
Software and tunes - Link Removed

Installation instructions in various languages - http://www.tomhamburg.net

FTDI drivers - Virtual COM Port Drivers

Cable - Link Removed
Or try Ebay for cheaper prices.



Simple over view:
1 - Download latest version of TuneECU. Unzip into new folder.
2 - Download key. Unzip into folder above.
3 - Download FTDI chip driver for cable.
4 - Order OBD-USB FTDI cable for VAG (VW Audi Group) and install drivers when cable arrives.
5 - Download any/all related maps for your bike.
6 - Open map and connect to bike (key and kill switch on, engine not running).
7 - Under ECU at top, select Read Map. This will upload the map from the ECU.
8 - Save the original map with a new name. Preferably in a new file for your future maps.
9 - Open map file you want to load to bike's ECU.
10 - Download map to ECU.


Now, start the questions on how to use or modify maps below.

Should you have issues connecting to the ECU, make sure your battery is fully charged FIRST. Then make sure key switch is ON and kill switch is ON.

YES - The TuneBoy cable will work with TuneECU.
NO - The TuneECU cable will not work with TuneBoy/TuneEdit.
 
small correction::D

Software : Link Removed and here

tunes: here and here

BR, Tom



Software and tunes - Link Removed

Installation instructions in various languages - TuneECU_Start

FTDI drivers - Virtual COM Port Drivers

Cable - Link Removed
Or try Ebay for cheaper prices.



Simple over view:
1 - Download latest version of TuneECU. Unzip into new folder.
2 - Download key. Unzip into folder above.
3 - Download FTDI chip driver for cable.
4 - Order OBD-USB FTDI cable for VAG (VW Audi Group) and install drivers when cable arrives.
5 - Download any/all related maps for your bike.
6 - Open map and connect to bike (key and kill switch on, engine not running).
7 - Under ECU at top, select Read Map. This will upload the map from the ECU.
8 - Save the original map with a new name. Preferably in a new file for your future maps.
9 - Open map file you want to load to bike's ECU.
10 - Download map to ECU.


Now, start the questions on how to use or modify maps below.

Should you have issues connecting to the ECU, make sure your battery is fully charged FIRST. Then make sure key switch is ON and kill switch is ON.

YES - The TuneBoy cable will work with TuneECU.
NO - The TuneECU cable will not work with TuneBoy/TuneEdit.
 
10-30-2010 TuneECU v1.7.7 now released

- has capability for Full-Screen display in MapEdit mode.

Very nice especially for the tuners!

BR, Tom
 
Just downloaded and extracted the new files. Lauched the program and was so pleased to see the full screen option. It makes editing so much easier on the eyes.

Thank you guys...

Gerry
 
Back
Top