dragonjocky
.040 Over
I started this build last February and fired it off recently. The motor has a THunder sliplees Drag clutch, Carrillo flat top 4.03 forged pistons with bored wrist pin openings and custom wrist pins, ported heads and a complete racing valve grind, custom high lift, long exhaust duration cams by Web Cam performance cams, a Dobeck 3.5 fuel processor, (wide band O2 sensor system on order), Bored intake manifold with 50% of the partition removed. It also has a twin bottle Dynotune N2O kit in a holding pattern until I complete the break in. All said and done this will be dyno tuned and quarter mile tested.
It's a 95 Cubic inch Suzuki Marauder bored .030 over.
Paint scheme will be done this winter, and lord knows what else. the bike is becoming a show project inspired by my son.
Before the build:
After the build:
It's a 95 Cubic inch Suzuki Marauder bored .030 over.
Paint scheme will be done this winter, and lord knows what else. the bike is becoming a show project inspired by my son.
Before the build:
After the build:
