Steering Damper

[EskimoPie]

Anybody fitted a steering damper to a 2.5 rocket? A couple of weeks ago I was casually cruising through a rural area with cruse control on and only my left hand lightly on the grip. Went through a rough patch on the road in an intersection and got a very surprising steering wobble for a second or so. Nothing major, but definitely woke me up.

 

[jlagrave]

I had the same thought the other day while ripping through some twisties. Definitely could benefit from a stabilizer.

 

[EskimoPie]

Well, with 120+ views and no suggestions, I suppose the answer is No.

 

[jlagrave]

Well, with 120+ views and no suggestions, I suppose the answer is No.

Probably just nothing available yet. Maybe @Lamonster could come up with a setup?!

 

[dougl]

These are typically found on smaller bikes with lighter front ends. Here is one for the older Rockets.

Small parts and accessories for your motorbike

Buy motorcycle accessories in the online shop of Motea Large selection of small parts and accessories at low prices ➔ Simply order online now!

www.motea.com

The issues are getting the right size for the bike and fitment.

 

[ThingKing]

I did a radial steering damper for my '14. @Claviger came up with a great solution, in the same thread.
I don't know if this is any help for the new models, though.

Steering damper kits wanted!

Reading @Claviger 's post, I do get a little concerned. This is the way I had it done last week. But if there were any signs of weakness in the headstock area, I would have it reinforced again. Anyway, the holes are very small. Probably better to have two small holes than one big one up there. I...

www.r3owners.net

 

[Kevin frazier]

I did a radial steering damper for my '14. @Claviger came up with a great solution, in the same thread.
I don't know if this is any help for the new models, though.

Steering damper kits wanted!

Reading @Claviger 's post, I do get a little concerned. This is the way I had it done last week. But if there were any signs of weakness in the headstock area, I would have it reinforced again. Anyway, the holes are very small. Probably better to have two small holes than one big one up there. I...

www.r3owners.net

Thanks i was looking for this thread and could not find it, till boom, thanks

 

[ThingKing]

Actually, in the meantime there is another possible solution showing up. The damper from the BMW R18 C might be quite appropriate.

 

[Kevin frazier]

Ill look into that as well but im gonna button this up, just waiting on shindy tube bracket and installing a nut rivet for body bracket and hope to have this installed, i was stumped until i glared realized saw where the one in Nevilles picture was attached, i was laser focused on bottom yoke drilling like claviger did but got the touring attaching to tube is the way to get the clearance for lock to lock. No tube covers but its chrome and i run a batwing and when i take it off its for business so looks are ok

 

[Rock Ape]

Not sure there's a big market for them for this bike given the types of roads we generally would ride. Do you ride on a lot of bad roads at times?

Never had anything even close to wobbles yet. All the best with your search brother. Keep us updated.