SPRINGS

[sonny]

Stock clutch springs shot after 38,000 miles with upgrade. Pads and steel plates were fine. Going in with barnnet pads. springs and steel plates. Not that heavily Modified just Ramair and Paul's complete 3 into one system and Hanso's tune. Life goes on.

 

[idk]

Check with @warp9.9 about heavy duty springs and different plate options.

 

[sonny]

Check with @warp9.9 about heavy duty springs and different plate options.

If I was running a Carpenter system I would run the springs provided by them but were not. Barnett is a quality product and comfortable with that.

 

[idk]

IIRC the "heavy Duty" spring are Kawasaki springs. I put them in mine with a set of clutch plate from a mod in Florida, but I can't remember their brand name, MTC I think. Very happy with them and Steel is still using them 70,000 miles later and he has 167 horsies at the back wheel. Nothing against Barnett though.

 

[barbagris]

Nothing against Barnett though.

Good Job - they fight back.

 

[Ishrub]

The definitive answers to rates and manufacturers etc.
Upgrading your clutch springs?? What NOT to buy... MTC