For Sale Sold Touring Handlebars From 2013 R3T

Jay

E pluribus unum
Joined
Jan 3, 2019
Messages
815
Location
California, USA
Ride
2023 Rocket 3 GT (Ego), 2021 Zero SR/S (Earth)
Sold

Selling the handlebars that came on my 2013 Rocket Touring. They are 35” wide and give great leverage. Hand position is good too, but swapped them out for Valkyrie handlebars that are about 1.5” narrower. These bars were just too wide for me. They aren’t new, but they are in good condition and just need a good cleaning and polishing. Not wrecked or bent.

in looking at other handlebars on our Rocket site, I am not sure if these are OEM Triumph or from another touring bike that was throttle-by-wire. These don’t have the little extension on the throttle side, however the bar is symmetrical with castle cutouts on the throttle and holes to route wires internally to the bar. If they were narrower I’d keep them, but I am happy with the Valk bars and Thunderbird risers.



66FF20D4-244C-42FC-8B23-CE34A779DD57.jpeg 0B46F6EB-ED76-4A6A-B7AE-89D8953B889E.jpeg A11534D6-584B-4673-85C6-6BC2CEFBE5BC.jpeg 3C15F038-9749-4DD4-ACBA-C7DFDEEC8AAF.jpeg 825AAC69-0A01-4263-8115-FB8BA75B0121.jpeg BCEC2EEE-1058-44D0-85BC-5AE06C0CAFAA.jpeg 229EBEDF-55E3-4F8A-857A-97882D3194C8.jpeg 053DC5F7-600B-4845-B0A0-D524A8EBF421.jpeg 92D046A5-F73C-4712-954E-CEA2CF82AFDE.jpeg 9AC9367B-F962-4E4D-BEFB-729CE8F8896A.jpeg
 
Last edited:
They are different from the 08 bars I just let go, the ends and that slot, mark bought mine to put on a roadster, hope controls line up for him and fit right, I’ll post back to let you how they work for him, in case someone else tries to do same thing
 
What is the difference between touring and roadster bars, are they different widths, pull back?
 
I think they're completely different, the Touring sweep back at the ends, to get closer to the rider, as the distance to the yoke is greater, non touring tend to be straighter
 
They are different from the 08 bars I just let go, the ends and that slot, mark bought mine to put on a roadster, hope controls line up for him and fit right, I’ll post back to let you how they work for him, in case someone else tries to do same thing
Kevin those bars don't look like factory to me. They have the control wires running through the bar and exit at the bottom. My bars have the clips on the outside to hold the wires from the controls. My guess is the controls and master cylinders are all the same. Looks to me like the touring bars are Roadster Bars pulled in towards the rider more. All of the Rockets I have seen, the cables run down the side of the bar. I could be wrong because I have not seen every year Rocket in person.
 
Kevin those bars don't look like factory to me. They have the control wires running through the bar and exit at the bottom. My bars have the clips on the outside to hold the wires from the controls. My guess is the controls and master cylinders are all the same. Looks to me like the touring bars are Roadster Bars pulled in towards the rider more. All of the Rockets I have seen, the cables run down the side of the bar. I could be wrong because I have not seen every year Rocket in person.
Mine should deliver tomorrow, the ends are very different, haven’t looked at part numbers but now you got me thinking I’m gonna go to hermys and look
 
Back
Top