Shift linkage piece.

[Jeremy]

What is this piece on the shift linkage? It seems like foam, but maybe its rotted rubber? Where can one get these and do they need to be there?

 

[1K9]

What is this piece on the shift linkage? It seems like foam, but maybe its rotted rubber? Where can one get these and do they need to be there?

Remove, clean, reassemble and ride.

 

[Tal]

Google 'World of Triumph'....parts...Rocket 3...and search in there.You may just get what you need from them.

 

[barbagris]

It's a simple anti rattle thingie. Nylon washers. But from the reddish colour the link joint is toast. So make a new link with good rose joints and a bit of threaded bar. Shifting will get better.

 

[R3T-Too]

I used a rubber boot made for the FJR to keep the grease in and the grit out; $10 for a pair.
http://www.rpmracingca.com/proddetail.asp?prod=2H9-18154-00Set&cat=55


See a photo here.
linkage boot

 

[Jeremy]

I used a rubber boot made for the FJR to keep the grease in and the grit out; $10 for a pair.
http://www.rpmracingca.com/proddetail.asp?prod=2H9-18154-00Set&cat=55


See a photo here.
linkage boot

Thank you, i have placed them on order. Much appreciated. what did you use to grease them before putting the boots on? how did you do it?

 

[warp9.9]

I used a rubber boot made for the FJR to keep the grease in and the grit out; $10 for a pair.
http://www.rpmracingca.com/proddetail.asp?prod=2H9-18154-00Set&cat=55


See a photo here.
linkage boot

Nice

 

[R3T-Too]

Thank you, i have placed them on order. Much appreciated. what did you use to grease them before putting the boots on? how did you do it?

I used WD40 to clean em out. Then worked in some lithium grease.