Secondarys

[joesoap]

Fellas can anyone explain the above and how to "de-restrict" them?
Cheers

 

[warp9.9]

Either open them 100% with ecu software or remove them.

 

[tails]

any info on how to remove them ??

 

[Idaho Red Rocket 3]

It is simple yet difficult. See below.

Remove bear claw.
Raise tank.
Remove intake plenum.
Tape secondary in place.
Remove the 2 screws in each tb.
Remove secondary plate.
Reassemble in reverse.

 

[Rick Morris]

Super easy. If you are removing the factory air box mess anyways, and putting on the K & Ns you will have the air box off any way. Two screws on each butterfly and your done. No more restrictions.

 

[joesoap]

Fantastic info...thanks fellas.

 

[Idaho Red Rocket 3]

Since you are in England you might want to replace the air intake system with a RamAir filter. Much simpler than the 3 actually 5 K&N.

 

[joesoap]

Since you are in England you might want to replace the air intake system with a RamAir filter. Much simpler than the 3 actually 5 K&N.

I have the ram air atm Idaho which now i know what ime looking for is going to make the job a lot easier...thanks for the help buddy..

 

[scot in exile]

Stick some toilet paper(clean) down the throttle bodies before you remove the six wee screws that way when you drop one it will be easy to get out.

 

[Paul Bryant]