Scorpion i900 Alarm and PC8

JohnnyCanuck

Supercharged
Joined
Dec 28, 2010
Messages
360
Location
Vancouver, Canada
I'm just setting up the Scorpion alarm on the bike and am going to plug it into the PC8. The Scorpion has a built in 15 amp fuse. I'm just wondering what unswitched circuit I should be using on the PC8. Should I use the one I have with a 5 amp fuse or the 15 amp fuse? I've read all of the Scorpion manual and can't find any reference to amperage anywhere. Any suggestions welcome! Thanks.
 
if it has a 15 amp inline then use a 15 on the pc8. if the line is long enough, i would remove the inline fuse and just run the one in the pc8.
 
I'm such an electrical neophyte - that makes total sense.

Is there any harm/benefit to just leaving the fuse on the Scorpion cable or is it just redundant and better off to save the fuse in case the one on the PC8 blows?

Thanks Bagman!
 
fuse

If theres a fuse in the scorpian wire just leave it there.
And plug it into your PC8.
Having 2 fuses will be fine.
Use the 15 amp on the PC8.
 
Back
Top