Pulling wheels for the first time

[Eric R.]

Hi guys. I am in the process of removing my wheels for the first time for a tire change on my 2015r3t.
I am attaching a picture of my front axle assembly and I am questioning if the groove in the middle of the left side spacer is supposed to be there or is it a wear mark from something?
Also, should I smear grease on the axle surface before reinstalling? It was pretty dry when I removed it.
Thanks for any help, Eric

 

[sonny]

Yes on the anti seize grease on axle. I do not have a groove like that on my spacers.

 

[TheKid]

That groove is fine, don't think that is where seal rides, but if it is, it wouldn't be a bad idea to replace the seal. I would not though, for if it is a wear ring, then the seal is doing it's job.

 

[Eric R.]

Kid, I don’t think the seal is that far out. I just wasn’t sure if the groove is supposed to be there

 

[TheKid]

They all have that ring. Don't know why

 

[sonny]

Mine don't.