Project Log: World, meet Scar!

[Claviger]

Well, here's a picture of Scar at the moment, 2006 bike with a 5th gear dog ring that's rounded off. The forks, brakes, and some other little bits will be removed, then he's strapped to pallet and in my garage late next week!

So now that Mufasa is very nearly complete, it's time to make the two bikes more focused.

Mufasa is well along the path of land speed bike.
Scar will be a heavily customized bike with little left untouched.

Current plans are:
Touring swingarm conversion
Touring rear wheel
LASleeves overbore liners
CP Pistons @10.5:1
Custom Cams
Custom Valvetrain
Haltech Elite 1000
Fully digital OLED color dash
Black Ops 1000cc injectors
Wlabro 255
Corvette 4bar Regulator/Filter
Ozrider Pipes (with a real muffler this time lmao)
TTS
Chopped and lightened frame
Cometic copper head gasket
MTC clutch setup
Robinson Trans again
Hugger rear fender
Modified gas tank
R1 Coils
Meth Injection
Some sort of bags and likely a batwing fairing
Heated Corbin Fastgun
Heated grips
Mupo forks
Custom Ohlins shocks
T-Bars
Decosses Magic Keyless Ignition
ABS Retrofit
Adaptive Headlights
Stereo of some sort (not off the shelf stuff)
Some LEO detection defense


7000 RPM limit, targeting 400+whp, the blowers going to be spinning it's ass off haha.

It's to be my furious street bagger

 

[Dr.D]

You’re freaking insane.

 

[CrzystghndKC]

Well, here's a picture of Scar at the moment, 2006 bike with a 5th gear dog ring that's rounded off. The forks, brakes, and some other little bits will be removed, then he's strapped to pallet and in my garage late next week!

So now that Mufasa is very nearly complete, it's time to make the two bikes more focused.

Mufasa is well along the path of land speed bike.
Scar will be a heavily customized bike with little left untouched.

Current plans are:
LASleeves overbore liners
CP Pistons @10.5:1
Custom Cams
Custom Valvetrain
Haltech Elite 1000
Fully digital OLED color dash
Black Ops 1000cc injectors
Wlabro 255
Corvette 4bar Regulator/Filter
Ozrider Pipes (with a real muffler this time lmao)
TTS
Chopped and lightened frame
Cometic copper head gasket
MTC clutch setup
Robinson Trans again
Hugger rear fender
Modified gas tank
R1 Coils
Meth Injection
Some sort of bags and likely a batwing fairing
Heated Corbin Fastgun
Heated grips
Mupo forks
Custom Ohlins shocks
T-Bars
Decosses Magic Keyless Ignition
ABS Retrofit
Adaptive Headlights
Stereo of some sort (not off the shelf stuff)
Some LEO detection defense


7000 RPM limit, targeting 400+whp, the blowers going to be spinning it's ass off haha.

It's to be my furious street bagger

It's good to plan your work. Can't wait for you to work your plan.

 

[Dr.D]

I’m just amazed at the different talents and skills that people have. I can cut out your kids wisdom teeth, do a root canal and crown for you and extract all your dads teeth, shape the bones and put in dentures but I’d chit outta luck taking a bike apart like that.

 

[Fenners]

I like the sound of this, TTS too. Going to get a great following on this thread.
What colour paint job?

 

[barbagris]

Rob - Whay not simply call DEGET (or speak with @warp9.9 ) and keep the current rear swinger - just have a different rim welded on. I keep umming and ahring this - to get a slimmer and 17" rear tyre in.

 

[Claviger]

Leaning towards white with no Pearl and minimal metallic flake, nice solid bright white, with some old world stuff going on. Paint will be the very last thing I do.

In the interim it'll be a Mish mash of whatever color parts I get the best deal on.

PS: Frame and motor won't stay black and silver either

 

[Claviger]

Rob - Whay not simply call DEGET (or speak with @warp9.9 ) and keep the current rear swinger - just have a different rim welded on. I keep umming and ahring this - to get a slimmer and 17" rear tyre in.

Deget doesn't respond, and there's no one state side I know of who will rework the wheel like they do

 

[barbagris]

Deget doesn't respond, and there's no one state side I know of who will rework the wheel like they do

I know Scott (@warp9.9 ) had the rear for the 450bhp Falcon done (18") - and IIRC in the USA!.

 

[barbagris]

PS: Frame and motor won't stay black and silver either

I dare you to use Flourescent Duracoat.