Micksan
Supercharged
- Joined
- Nov 16, 2010
- Messages
- 448
- Location
- Del City Ok
- Ride
- 2023 Triumph R3 GT, 2022 Moto Guzzi V85TT,
About 3 or 4 days ago I found a error code on my Tune ECU ,which said #3 coil. This morning I went out to remove the coil and get it ready for the new/used replacement due in. Found the ground wire was loose. checked #2 coil and found the hot lead loose.
I replaced both connectors with good crimp on connectors.
hooked up the computer , cleared all error codes. The coil error did not come back. Also sounds like it is hitting on all 3 cylinders good and solid.
Thought I would pass this along.
I replaced both connectors with good crimp on connectors.
hooked up the computer , cleared all error codes. The coil error did not come back. Also sounds like it is hitting on all 3 cylinders good and solid.
Thought I would pass this along.
