Aaah
.020 Over
- Joined
- Apr 22, 2021
- Messages
- 11
- Ride
- R3
Hello All
I have had this issue since new (18 months). 2021 R3. See pic.
Some times and with out any known sequence to bring it on, when I operate the indicator switch left or right, one of the indicators (led type) will no operate and the corresponding side will flash very fast (just like the blown globe days.)
It could be the front left or right or the rear left or right...no pattern that I can work out.
Then it will come good (when it wants to) and be ok for days.
There are no fault codes stored or found by the dealer..
- Triumph has reloaded the software
-Checked all indicator connections back to the main loom
- Replaced the left hand switch block.
Any ideas and or other had the same and had it fixed??
Thanks
Alan
I have had this issue since new (18 months). 2021 R3. See pic.
Some times and with out any known sequence to bring it on, when I operate the indicator switch left or right, one of the indicators (led type) will no operate and the corresponding side will flash very fast (just like the blown globe days.)
It could be the front left or right or the rear left or right...no pattern that I can work out.
Then it will come good (when it wants to) and be ok for days.
There are no fault codes stored or found by the dealer..
- Triumph has reloaded the software
-Checked all indicator connections back to the main loom
- Replaced the left hand switch block.
Any ideas and or other had the same and had it fixed??
Thanks
Alan