Front Forks To Soft

bruce saarinen

.020 Over
Joined
May 5, 2011
Messages
16
Location
Kelowna, BC
Ride
2016 Honda Africa Twin
I can bottom out the front forks on my 2005 Rocket 3 by just grabbing a hand full of front brake in my garage. What is recommended to fix this problem? Obviously the springs are to weak and how about the valving? Thanks, Bruce
 
need new springs.
Mine aren't that bad yet,
but I'm gonna do the job pretty quick myself.
i'm going with progressive springs myself.
Need to find a link from somebody who has already done it I guess.
Anybody know the details of where or what to buy?
 
Progressive fork springs are good. I used 15w fork oil. Had dealer install them.
I think the forks springs were around $100, not a bad price.
 
I'm getting Progressives installed this week. Mine were very soft too. I'm letting the dealer do it because I think it's a reasonabley tricky job. Then I'll have progressives front and back, should make a big difference.
 
need new springs.
Mine aren't that bad yet,
but I'm gonna do the job pretty quick myself.
i'm going with progressive springs myself.
Need to find a link from somebody who has already done it I guess.
Anybody know the details of where or what to buy?

See posts 28 - 32 in the thread "Front brake pads"
 
Appreciate that Fred.

I knew Bishop had a spring compressor, and was lending it out, and whoever was next,
that captain would forward them on to the next one of us on the list.
somebody renigged on us? Is this feller still a member in good standing?
if so, maybe he just forgot to send them on or didn't know who to send them to.
That being the case, I'm the next guy on the list whoever has them.
You can just forward them on to me.
Skip Wilson
105 W.Main St.
Barnsdall, Ok. 74002
when I get done with them,
I'll post and ask who else needs them.
 
Last edited by a moderator:
Back
Top