Eastern Beaver headlight relay install in less than 2 hours

Mittzy

The Hooligan - Just Doing Stuff
Joined
Aug 29, 2011
Messages
8,538
Location
Brisbane, Australia
Ride
2020 TFC #385, 2014 R3 Roadster 230hp (BRUTUS)
Just done the Eastern beaver headlight relay install including install of a sebel horn and relay in two hours.
Absolutely one of the easiest electrical installations I have ever done - it's nearly a plug and play job, all they need to do is include the 4 pin plug for the light hook up and include the park light holder and it would be a plug and play setup..... Very happy
 
Same here. If it hadn't been for the soldering, probably would've been less than an hour total! With harnesses could be 30 mins. Hardest part was putting headlights back in. It's a 3 handed job ;)
 
I ran an extra twin cable to each light housing cos I am going to wire the park lights in to the factory harness.
 
P1070306.JPG
Nup - Sorry. I just ran a twin cable next to the EB cable.
Low Beam Pics Before and After
P1070304.JPG
 
Back
Top