Alex Dem

.020 Over
Joined
Jun 4, 2018
Messages
34
Location
Moscow, Russia
Ride
Triumph Rocket 3 2012 Touring ABS
Hi, guys. I looking for chrome decals on top of saddlebags. Chrome moldings or stripes or sort of that, like on the picture.
Any ideas? :)
HTB1nzKjSVXXXXblXFXXq6xXFXXXw.jpg
 
Google and eBay are your friends.

There would be thousands you can use both aftermarket and re-purposed from other vehicles/places. Old Fridges and appliances used to have these type of finishes including jukeboxes.

And there is always the factory OEM Triumph accessory list for Touring panniers and rear guards blades that could be adapted to pannier use. These are solid steel chromed and I have six (6) I was going to use them to make a Solo seated fender rack using 3 or more attached to the rear Rocket guard. The curve matches the R3/Roadster as well as the Touring models' rear guards, but once I got Red Striped body-tins and a RIVCO rear solo rack I changed tack.

REAR FENDER EMBELLISHER, BLADE - CHROME A9738113
upload_2018-6-8_15-39-38.png

SIDE PANEL PROTECTORS A9738066
upload_2018-6-8_15-35-40.png


PANNIER EMBELLISHER KIT - SKIRT A9738065
upload_2018-6-8_15-36-21.png


PANNIER EMBELLISHER KIT - BLADE A9738063
upload_2018-6-8_15-37-21.png



I just sold one of these - New in box old stock for Au$350 a month or so after @Mitzzy sold one too for Au$450 - the first two to emerge in quite a while since they became unavailable 6 years ago or more.

PANNIER GUARD RAILS - CHROME A9758115
upload_2018-6-8_15-38-20.png
 
Google and eBay are your friends.

There would be thousands you can use both aftermarket and re-purposed from other vehicles/places. Old Fridges and appliances used to have these type of finishes including jukeboxes.

And there is always the factory OEM Triumph accessory list for Touring panniers and rear guards blades that could be adapted to pannier use. These are solid steel chromed and I have six (6) I was going to use them to make a Solo seated fender rack using 3 or more attached to the rear Rocket guard. The curve matches the R3/Roadster as well as the Touring models' rear guards, but once I got Red Striped body-tins and a RIVCO rear solo rack I changed tack.

Thanks for advice. I mean PANNIER EMBELLISHER KIT - BLADE A9738063 - thanks for that. But I already have PANNIER EMBELLISHER KIT - SKIRT A9738065 and PANNIER GUARD RAILS - CHROME A9758115, installed on panniers, I think it will be too much. )))

bvCZQs6jkRADKCzRO1nUbfVEgEozmZy10EO21Bu4rvRWggxfX_8zgEp6YcAKr5sEoe31xbPYO1LKs0BPHxR8zY3HRx5s4-XprvEp8Ze0xb-JPDHYzkEiVoJl8m5Sr-LHMTehP4Z563G-989txhBhM_h2ZUtry2tfrGtkGowInYlzNah7lPrF1HuaMDQHHQfRymZTJHfXLwYKkjpgXP3MMmYXbEWmQ2jO12THkVbHG8tdhqJTnylG4TxFCDdxRvs0-rGUhfsiDy7yU-r5yx6XKEhhv8YEcBsep2SxPFky5FoOoajgE97NT_6DigCQ6boPalwYhNzNsxkzyQRuOT7Ox67FnU_5KedhS5zhMzwBgqHPSThqLQd9lBrMTTq8LaErSjIDhPzMY5YOtJHSBXiimfA4JJLv_D0FxDkgQB_MxZy8LTUAtjVoBya6zw81mgkYh5mYzIvfYzSjtSWtqwIUxw0nnZNo30rrbrG7u_ZV0OBvedXZVe3cX6rDTArWv-ghpJdlzLa8GMX7OyZW72M9dQfrHwubgSZ2dsMoLLyPLMwTIdbPyh7ugpE1HQLTo8BIHm3Xd2yIDSeBVXYSLC3nBoyVjVLa8SklLXtrJ90=w1266-h949-no
 
Back
Top