crankshaft sprocket

ken

.020 Over
Joined
Jan 16, 2015
Messages
48
Location
Wirral UK
Ride
rocket 3 classic 2008
Just about to time up the camshafts and there is not dot on the camshaft sprocket on the front took it off and nothing on the back. the open port above you can see the crankshaft and a timing dot. my question is do you line up the dot to the top or bottom line marked on the case
 
There should be two dots and two makes on the crank. It doesn't matter which one you use. The lower one is probably more visible thru the clutch cover inspection port then the upper one. If you have the cover of its a moot point.
 
Back
Top