Clearview windshield

[crashpete]

While I wait for my new wheel to come in, and before all of this happened, I ordered a clearview windshield and it showed up yesterday!

 

[Big Gun]

Looks a lot like mine, I hope your's works as well for you as mine does for me.

 

[rocketjohn]

I ordered one, and a guy called to say he didn't have one in stock like I ordered. He said he would make one if I wanted, and even suggested a cheaper shipping method, which caused me to get 26 dollars back! So far a stand up company!

 

[crashpete]

Yeah, mine was recently made, took about a month.

 

[crashpete]

Does anyone have a torque setting for the 10mm nuts?

 

[HansO]

I love mine if you are using thier plastic insert just dont go to tight, I didnt use torque wrench just common sense use a little loctite tighten them nice and firm and check them after a bit of a ride, mine has done thousands of miles, just another note if you add lowers you will get rid of any buffeting, with that vent open it is perfect with just a light breeze in my face.

 

[warp9.9]

If you use locktite use the blue thread locker medium strength in case you ever have to take it apart

 

[hvacnr]

If you use locktite use the blue thread locker medium strength in case you ever have to take it apart

Amen on that

 

[HansO]

If you use locktite use the blue thread locker medium strength in case you ever have to take it apart

all i ever use

 

[1olbull]

Yes indeed, the blue!
You shall need to remove it when you replace it with a 7Jurock.
Better shield IMHO and I've used four Clearview previously.
Their size offering is more accurate, they are recurved at the top and considerably less expensive.