Search results

  1. RICHARD ALBANS

    Prototype Performance cams for the Rocket.

    I know what you mean. It’s funny how you get used to power and ‘feel the need’ after a while. 😀
  2. RICHARD ALBANS

    Prototype Performance cams for the Rocket.

    Yes still stock pistons. We start replacing them today. So we can fit the supercharger back on.
  3. RICHARD ALBANS

    My adventures in a custom exhaust

    You have done essentially the same as what I did the other week. It does affect the fueling, It actually runs richer at mid revs and you loose a little power. You can get it back and gain a little by tuning with the power commander and ignition module.
  4. RICHARD ALBANS

    Forged FI Pistons for the Rocket

    10.8:1
  5. RICHARD ALBANS

    Prototype Performance cams for the Rocket.

    Ok Dyno results are in. So we set the cams at reasonable lobe centres. 108/108. The cams were base circle ground so we were limited to 0.7mm more lift and more duration on both cams, so a pretty mild increase ( a stage 1 grind you might say). We know my exhaust mods did nothing for power...
  6. RICHARD ALBANS

    Forged FI Pistons for the Rocket

    I considered it :)
  7. RICHARD ALBANS

    Rear suspension

    I think compression is too hard and rebound to soft both front and rear. I have a friend having an Ohlins shock made for his r3. It will be interesting to compare. I know my wrists and my back don't like more than 1/2 an hour at the mo. I'm certainly going to try the mods you guys are having a...
  8. RICHARD ALBANS

    Forged FI Pistons for the Rocket

    No room for bigger bore, stroking could be possible. But it's far more expensive than supercharging and doesn't give anywhere the gains :)
  9. RICHARD ALBANS

    PAIR VALVE BLANK OFF PLATES

    No it pulls it from outside.
  10. RICHARD ALBANS

    Prototype Performance cams for the Rocket.

    cam caps are just across inlet and exhaust not like the old R3. Less weight?
  11. RICHARD ALBANS

    TTS Supercharger

    OK to get back on the Supercharger track. How many guys would be interested in buying one once developed (say 3 months time). Power goal is 280-300 hp. Obviously as with all my conversions power is linear and responsive, very easy to control. The whole conversion will be CNC machined and we...
  12. RICHARD ALBANS

    Prototype Performance cams for the Rocket.

    Cams are dialed in. Refit everything else tomorrow. Dyno Wednesday Althings being equal.
  13. RICHARD ALBANS

    PAIR VALVE BLANK OFF PLATES

    No air would be sucked in on overrun or idle or cruise. The Lambda sensor is live so it will correct normal running.
  14. RICHARD ALBANS

    PAIR VALVE BLANK OFF PLATES

    We decided to make a big effort to stop the popping on overrun so have made blank off plates. That and remapping with our Power commander V should ease the problem.
  15. RICHARD ALBANS

    TTS Supercharger

    So i'm not the only one who thinks the clocks are not in the right place.
  16. RICHARD ALBANS

    Forged FI Pistons for the Rocket

    I’ll be doing that tonight 😂😂
  17. RICHARD ALBANS

    TTS Supercharger

    Bit difficult to explain. But if you remove the countersunk screw from under the clocks and carefully move them to one side it reviels the mounting bracket which is in two halves clamped around the handlebar. undue the 2 5mm screws holding that together and take the clamp off, turn it around and...
  18. RICHARD ALBANS

    TTS Supercharger

    Its top rear of the airbox nearest your leg. ***** to get too.
  19. RICHARD ALBANS

    Forged FI Pistons for the Rocket

    At last we have the Custom JE forged pistons in stock. I set the compression at 9.5:1 and they are built to take in excess of 300 hp. As soon as we have finished testing the new cam set up we will be stripping the motor down and replacing the pistons. Then fitting our supercharger conversion. So...
Top
AdBlock Detected

We get it, advertisements are annoying!

Ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of R3Owners. For the best possible site experience please take a moment to disable your AdBlocker for R3Owners.Net.

I've Disabled AdBlock