What did you do to your Rocket today?

I put mine in the infill panel and agree it seems to like the clean cool unobstructed air in that area
I did have it there too Kev , before moving it down to its current position . The hunting that I was experiencing has now completely disappeared . It definitely likes the cooler air , which is strange considering its original placement in the intake phenom . It must have got pretty warm in there ?
 
I did have it there too Kev , before moving it down to its current position . The hunting that I was experiencing has now completely disappeared . It definitely likes the cooler air , which is strange considering its original placement in the intake phenom . It must have got pretty warm in there ?
i bet it did but those engineers and tuners make it all work together, probably helped keep it lean, I like the use of the puke tank attachment point
 
I did have it there too Kev , before moving it down to its current position . The hunting that I was experiencing has now completely disappeared . It definitely likes the cooler air , which is strange considering its original placement in the intake phenom . It must have got pretty warm in there ?
I actually drilled the panel and the ait sensor sticks thru it and the filter added secures it, either way it likeys out there
 
Someone with a face that only a mother could love Paul !

I'm quite into photography Nat, not so much as I used to be, but I'm always conscious of my reflection when taking photos in chrome, I try to minimize myself as much as possible.
Quite challenging at times !

8.JPG
 
Yesterday I worked on Black Mamba too as I have to show love to both bikes so they don't get jealous:
Installed Rivco Chrome drive shaft cover that I had traded Ishrub my backrest and pad for.
Installed matching Rivco Chrome swing arm cover bling that I found on eBay for $60.
IMG_4360[1].JPG
IMG_4359[1].JPG

Not sure about the chrome drive shaft cover there Mr Tribal, (I like black) but I do like that R/H swingarm cover, I had seen one of those on a bike in Europe, I'll have to make myself one, unless they can be bought anywhere ???
Some time ago I made a cover for the frame tube between the Engine and R/H side cover so as to cover that god awful casting there.
It's a bit hard to see in this photo, but it worked well.
In fact so well that no one ever notices.

G.jpg

A better shot.
IMG_1799.JPG
 
Not sure about the chrome drive shaft cover there Mr Tribal, (I like black) but I do like that R/H swingarm cover, I had seen one of those on a bike in Europe, I'll have to make myself one, unless they can be bought anywhere ???
Some time ago I made a cover for the frame tube between the Engine and R/H side cover so as to cover that god awful casting there.
It's a bit hard to see in this photo, but it worked well.
In fact so well that no one ever notices.

G.jpg

A better shot.
IMG_1799.JPG
Hi Paul. Those are both from Rivco and they discontinued them a long time ago.

I traded Ish a backrest & pad for the shaft cover and got super lucky and found the swing arm side on eBay for US$60 the same night.

I don’t see any listed now.

newr3 shows one for $80 but I don’t think they actually have it.
 
I'm quite into photography Nat, not so much as I used to be, but I'm always conscious of my reflection when taking photos in chrome, I try to minimize myself as much as possible.
Quite challenging at times !

8.JPG
It's alrite for you , your pretty ! I had never even considered reflections ? bout as close to a mirror as I ever get !
 
Back
Top