heil_7134
.020 Over
seems like a lot of guys has missed this thread.
i think that first u need to make sure of your battery
put volt meter across the bat and read volts while running your checks>
the obd connector has a positive and negative terminal and low volts u would have a problem.
i would also check volts at the fuses.
i think that the voltage at the alarm connector is correct with the loop installed it should power up the bike.
i checked the battery volts and the fuses, all fuses were ok and registered same volts as the battery.
it just seems the ecu is not powering up, i already checked the ecm relay and even swapped it to the cooling fan relay, even installed a new relay, still nothing.