Does anyone have a wire diagram for the storm

Amigo,
I reckon they be the signal mirrors.
Good on ya for making the extra effort - tis well worth it!
I have had Rivco on mine for years with NO issues and I love them!
 
Last edited:
Where the hell do i find a manual to purchase????????????????
Google it I just did and all kinds of info popped up. Try the RAT forum lots more Thunderbird info than on this Rocket forum.
 
Last edited:
Not necessarily for the storm, but here's what I've got and gathered:
Here is the wiring diagram:
Screenshot_20191116-200619_Hancom Office Editor.jpg
and the key
Screenshot_20191116-200627_Hancom Office Editor.jpg

And a zoom on the key, for wire color ID, which to me looks like GR and GW,
Screenshot_20191116-200634_Hancom Office Editor.jpg

Lastly, here's a link to the manual :

https://www.google.com/url?sa=t&sou...DMAB6BAgBEAY&usg=AOvVaw3Eg_rDCRQKe5i9eyql-hXS
 

Attachments

  • Screenshot_20191116-200627_Hancom Office Editor.jpg
    Screenshot_20191116-200627_Hancom Office Editor.jpg
    95.8 KB · Views: 3
According to the wiring diagram @idk has posted red/green on the left and red/white on the right .

No, they are green/red and green/white left/right respectively
I already gave this info to @nolton including sending him a compete wiring diagram for the TBird several weeks ago - he is just not able to locate them physically on the bike

Here is the reply I just gave him again in PM a few mins ago

You're not looking in the right place - those are the wires in the connector on the harness section that goes to the RIGHT bar-switch (brake lever side) - as you have found, that section of harness does NOT contain those wires. (he had identified a group of wires, none of which were the afore-mentioned green/white and green/red)

The turn signal wires come off the MAIN harness, not on that section that connects to the bar switch - they are probably in the same section of harness that feeds the headlight

You can also find those colour wires for turn signals on the harness section that goes to the LEFT bar-switch (clutch lever side) connector

I identified the colours correctly - you just need to look for them - as I said earlier every single Triumph for 20+ years follows that convention however I specifically checked the TBird diagram to confirm
 
Back
Top