Where to move sensors

Have another question for you. Do you recommend using the filter on the crankcase breather or routing a hose up to one of the filters. I think rocket scientist did that. Sorry to ask so many questions, just old school and unfamiliar with a lot of the ECU stuff. Not that the breather has anything to do with that
ya Fred ran his to the throttle body. I run mine to a baffled oil catch can seperate any mist products and the it get vacuumed out the exhaust. If I didn't have that I'd be lokking into letting the engine burn it up like Fred did its just easier then cleaning the filter.
 
ya Fred ran his to the throttle body. I run mine to a baffled oil catch can seperate any mist products and the it get vacuumed out the exhaust. If I didn't have that I'd be lokking into letting the engine burn it up like Fred did its just easier then cleaning the filter.
Thanks Warp. I think I'll run a line up and into one of the filters. I have a picture of his off of a post. Seen a couple of pics of the area around the filter on the crankcase. Makes a mess after awhile. That's why I thought I'd ask. Hopefully get the sensor moved, the filters and pipes done by Friday eve so I can try to load the new tune and get it back on the road on Saturday. Been riding another bike to work this week while the Rockets down and want it back. There's just no substitute lol, plus I'm excited to see what the changes do to the grin factor :)
 
Finally getting to change out exhaust and intake. Wondering if you guys have removed all the intake plenum including the center section under the tank that the pressure sensor and lines mount to. If so, what did you do with the junction for the pressure lines and the sensor. The other question is what needs to be done with the MAP sensor from the filter box? I've already asked where everyone was mounting the temp sensor. Lookin forward to your replies. Had my pipes and filters for several weeks and can't take it anymore lol.
If you have not watched it on YouTube there is an installation video for the Ramair system that is a very good step by step tutorial. It even has a beer break during installation. I think it answer most all your questions.
 
If you have not watched it on YouTube there is an installation video for the Ramair system that is a very good step by step tutorial. It even has a beer break during installation. I think it answer most all your questions.
Thank you
 
Back
Top