Can I fit Roadster 300, 801 and 802 exhausts to a 2006 Classic

Fenners · Jun 18, 2019

Ok here is my growing concern.

I will need to replace my sidewinder de-Cat exhaust system with a Triumph CAT system. The thought police are coming and both noise and emissions testing could leave me with a bike that I will not be allowed to ride.
With this in mind I would like to have the option to fit the symmetrical 2 pipe (built in CAT 2209801 & 2209802) exhaust system from the roadster onto my Classic 2006.
Is this possible - it looks like I would need the brackets as they are different from the 3 pipe original system (2208614, 15 & 2208420)

Apologies for discussing a Classic problem in the Roadster forum.

I have also been looking into retro-fitting an inline CAT into the sidewinders which would be my optimum choice. Has anyone else tried anything similar?

Paul Bryant · Jun 18, 2019

You could fit the entire Roadster system, mufflers (that weigh a ton) Muffler mounting brackets and cross over pipe to your '06.
This entire assembly will slide straight onto your stock header, and bolt up to the stock passenger footrest mounting point
The R/H bracket on the Roadster cross over pipe won't line up with anything but that's a small issue.

Triple Trouble · Jun 18, 2019

Did you check that the UK version actually had a catalytic converter on it? I know the Canadian and USA bikes had an empty catbox (except for Californian models).

barbagris · Jun 18, 2019

Triple Trouble said:
Did you check that the UK version actually had a catalytic converter on it? I know the Canadian and USA bikes had an empty catbox (except for Californian models).

R3's were EU3 certified - So had Cat's.

barbagris · Jun 19, 2019

Fenners said:
The thought police are coming and both noise and emissions testing could leave me with a bike that I will not be allowed to ride.

Another option - though maybe a bit expensive - There are a few European Exhaust mfrs that make EU certified replacement pipes - these have cats in. Zard is one that springs to mind. I know your pain - I have to refit the OEM pipes every MoT (thankfully here that is every 2 years).

Fenners · Jun 19, 2019

Thanks Paul, Triple Trouble and Barbagris,

You all are stars thanks, I think that the posted part number silencers have the CAT fitted inside them, and yes I do like the Zard system but it is too expensive for me to get past the wife.

SMLWNKR · Apr 28, 2020

Paul Bryant said:
You could fit the entire Roadster system, mufflers (that weigh a ton) Muffler mounting brackets and cross over pipe to your '06.
This entire assembly will slide straight onto your stock header, and bolt up to the stock passenger footrest mounting point
The R/H bracket on the Roadster cross over pipe won't line up with anything but that's a small issue.

Paul, I see this is an old post but hope you can answer my question. I’m also thinking if installing Roadster mufflers on my 06. Will I need a new tube?

SMLWNKR · Apr 28, 2020

Paul Bryant said:
You could fit the entire Roadster system, mufflers (that weigh a ton) Muffler mounting brackets and cross over pipe to your '06.
This entire assembly will slide straight onto your stock header, and bolt up to the stock passenger footrest mounting point
The R/H bracket on the Roadster cross over pipe won't line up with anything but that's a small issue.

Tune not tube.

Paul Bryant · Apr 28, 2020

SMLWNKR said:
Paul, I see this is an old post but hope you can answer my question. I’m also thinking if installing Roadster mufflers on my 06. Will I need a new tube?

I would say that you probably would to suit the Roadster set up.

Can I fit Roadster 300, 801 and 802 exhausts to a 2006 Classic

Fenners

Supercharged

Paul Bryant

Living Legend

Triple Trouble

The Duk of death

barbagris

Mad Scientist

barbagris

Mad Scientist

Fenners

Supercharged

SMLWNKR

.040 Over

SMLWNKR

.040 Over

Paul Bryant

Living Legend

Similar threads

Forums

Features

Forum Usage