No idea mate, have to check them out if tall or short, but old providers at a good price like you do get consideration! I'm still using your towels as bath mats. I thought everyone wanted the tall more supportive version but your pillion's comfort may not rate as high as your own concept of beauty! ;):p:D:roll::roll:

Good to hear the towels are still getting some use!

Okay, a tall back rest would be fine, but if there is only a short one,,,,,,,,
 
OK Here is what I have.

The box had original wrappings, instructions but they are NOT NEW, BEEN USED AND REPACKED and I realise now I have bolted the rack itself to my Mittzy made Quick Detach sissy bar/rack system. As can be seen in the photos I fitted this without the sissy bar a few weeks ago but am happy to remove and use my black painted one after I remove the paint. I had already taken it off the bike a few days ago The better news for @Noidea is that they are the short sissy bar version.

I have 4 pairs of the indented rear guard covers 3 chrome and 1 painted black. The other chrome ones are in good/excellent condition with one pair wrapped in same brown paper and presumably came with the 'Short' kit. As you can see I have all the black rubber edge trims to stop them marking your rear mudguards.

I found another 3 pairs of the non-indented ones too for use without sissy bars/racks as well as the ones on my bike currently. At least one of the chrome pairs are brand new in original cellophane and never used.

The second 'Tall' chrome sissybar/rack is assembled with the $50 accessory embellishment badge and ready to install. I'll break it down for shipping with a pair of indented rear guard covers as well.

All marks and smudges are just finger marks and a little grime - no rust or dings on the chrome here.


'Tall' sissy bar & rack and pad with embellisher badge
P1050331.JPG


P1050332.JPG

P1050333.JPG
P1050334.JPG


Rear indented side guard covers, my black pair top and bottom
P1050335.JPG
P1050336.JPG
 
Last edited:
All marks and smudges are just finger marks and a little grime - no rust or dings on the chrome here.

'Short' sissy bar
P1050323.JPG
P1050324.JPG
P1050325.JPG
P1050326.JPG


'Short' sissy bar rack on my Mittzy QD system to be removed.
P1050327.JPG
P1050328.JPG
P1050329.JPG
P1050330.JPG
 
When you fit the rack the uprights need cutouts in the stock chrome mudguard side panels. (#6 and #7 in image below). From memory they come with the kit but can be purchased separately.

http://www.ajsmotorcycles.com.au/partFinder/fiche/triumph/0/rocket-iii-classic-roadster/short-passenger-backrest-luggage-rack#A9738071e

100065427-0-2.jpg


# On Diagram Part # Description Price Per Item

1 A9738071 T1 PASSENGER BACKREST x1 $535.75
2 A9733501 T1 PASSENGER BACKREST x1 $96.70
3 A9733502 T1 LUGGAGE RACK x1 $88.35
4 A9750265 T1 PRESSING SUPPORT LH x1 $66.95
5 A9750266 T1 PRESSING SUPPORT RH x1 $66.95
6 A9750282 T1 MUDGUARD COVER REAR x1 $96.65
7 A9750283 T1 MUDGUARD COVER REAR x1 $96.65
9 A9910052 T1 SCREW DOMEHEAD M6 x4 $1.45
10 T3205254 T3 BOLT,HHF,LGHTD,M8X1. x4 $1.80
11 T3350004 T3 LOCKNUT FLANGED M8 x4 $2.75
12 A9910835 T1 BOLT M8 X 1.25 X 35 x4 $2.85
13 T3350700 T3 NUT FLANGED DOMED x4 $2.45
14 A9710032 **Loop ->T2080296 x2 $1.35
15 A9710033 T1 EDGE TRIM SHORT x2 $0.30
Reference: 1
T1 PASSENGER BACKREST
A9738071
$535.75



And the passenger back pads were/are extra ! :(:mad::eek::banghead:

AJ's Motorcycles - ROCKET III, CLASSIC & ROADSTER 0 - Passenger Backrest Back Rest

Ref Part # Description # On Diagram Price Per Item
1 A9708177 T1 PASSENGER BACKREST B x1 $178.60

100065435-0-2.jpg
 
Ishrub, after Noidea has sorted what he would like.

I would like, a tall backrest and rack, including all the brackets and any covers required to fit it.

Could you give me a price, if I give another one I feel I might embarrass myself again!

Failing that, at least I now know all the bits required.
 
Ishrub, after Noidea has sorted what he would like.

I would like, a tall backrest and rack, including all the brackets and any covers required to fit it.

Could you give me a price, if I give another one I feel I might embarrass myself again!

Failing that, at least I now know all the bits required.


I'll PM you.
 
Lets say $300 +postage for each complete set, as noidea insisted on the Short and started the thread he gets it. ;):D
Please send me your address details via PM and I will pack and get shipping quotes via Australia Post with insurance for $300.

Payment to be via Paypal account pwhite60@iinet.net.au as 'Send money to Friends/Family' so no fees.

Cheers

Peter
 
While your on a roll can you give me a price for shorty posted to 2483 NSW....edit, just sent you my address
All marks and smudges are just finger marks and a little grime - no rust or dings on the chrome here.

'Short' sissy bar
P1050323.JPG
P1050324.JPG
P1050325.JPG
P1050326.JPG


'Short' sissy bar rack on my Mittzy QD system to be removed.
P1050327.JPG
P1050328.JPG
P1050329.JPG
P1050330.JPG
 
Last edited:
Back
Top