If you plan to use OEM nuts on the header plate, you might need additional washers as spacers under the nuts. Off subject, but what is the outlet diameter of the muffler baffle?
 
Had it out getting painted and the guy was as fast as the second coming of christ.
second coming.jpg
 
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
DBaffle was installed in the pipe so no picture but it is the one that Carpenter sells, fit went pretty easy if you can do a six piece jigsaw puzzle you can instal the exhaust,
Roughly about half an hour to instal that was with the existing exhaust removed and everything cleaned that needed cleaned.
Will be looking for some neater spring covers or will buy some nice clamps but for the time the covers will stay on as about two of the springs will rub against the exhaust.
 
Back
Top