I cut some of the claw away and had to notch the 3rd filter to clear. I'll raise the cut on 1 and 2 next week when I have time. I ran the 12 minute tune, shut it off then started it again. I played with the throttle and this thing was torquing at the straps. I can't wait for the snow to melt to try it out.
I've seen your post's re: foam filter in bottom & understand it would work, but it still breathes - I think Norm is going to cause problems by taping the hole shut
You will need s2 of this filter K&N 62-1340 Vent Filters. You will need 3 of this filter K&N RU-2780 if you want to change the air filters on your bike. Hope this helps you
@BigNorm & @skydog1000 So is this the 2nd vent filter connecting to the tappet cover and as my bike was fitted with a RamAir before I bought it will I have a 2nd vent filter too? I thought there was just one that fitted crankcase at rear of engine that used to have a hose to airbox. I'll have to look for it.