Spot of trouble with clutch
- Thread starter Wrecka
- Start date
Evil Mitch
LETS RIDE
there u go the upgraded version lol
TOMCAT
Rage against the machine
- Joined
- Jan 9, 2011
- Messages
- 9,259
- Location
- ALBANY - Western Australia
- Ride
- 2009 RIII Standard - 2008 Speed Triple -1995 900 T'Bird
Croft ... you are what we refer to in Australia as a ..... 'smarty pants'
cr0ft
Living Legend
Haha, well at least that's about as clear as it gets.
Well, at least there is "smart" in there somewhere, I'll take it.
Trirocket3
Turbocharged
- Joined
- Sep 11, 2005
- Messages
- 837
I thought 2nd post said it all.
Here we are 3 pages on, too many brainy b*st*rds on here
I h8te computa wiz's
Here we are 3 pages on, too many brainy b*st*rds on here
I h8te computa wiz's
CanberraR3
Living Legend
- Joined
- May 27, 2010
- Messages
- 11,317
- Location
- Canberra, Australia
- Ride
- Triumphs, but no Rocket just now.
I thought 2nd post said it all.
Here we are 3 pages on, too many brainy b*st*rds on here
I h8te computa wiz's
You're right of course, although I think post #3 pretty much ensured it wasn't going to end there.
Hey all , still having dramas , cant get the cable into the bottom lever , am i suppose to hook the cable up before i put the lever on the splined shaft ( cant line the dots up that way ) or after the lever is on ? i cant get any leverage on it to move it into a position where i can get the cable in when its already on the splined shaft, i nearly put a lump of wood through the radiator and i tried levering with a screwdriver but that was just damaging the engine and the lever, please help im starting to ***ing lose my shiittt with this, already had to throw a sickie today and need the bike to get to work tomorrow....
budman
Nitrous
read post #14 in the following thread...
http://www.r3owners.net/threads/new-risers-but-now-no-clutch.1443/page-2
http://www.r3owners.net/threads/new-risers-but-now-no-clutch.1443/page-2
There was no way in hell i could turn that shaft counter clockwise with my fingers, had to get a multigrip on there to turn it, still couldnt get both dots to line up either , out about one spline. instead of having 2-3mm freeplay on the lever i have 5-6 , will this cause a problem ? From what im understanding it's bad to have to much tension on the cable i have nil, need to take it for a ride to see if i have enough to disengage the clutch now.
HansO
Not Taking Life Too Seriously
- Joined
- Apr 4, 2010
- Messages
- 13,447
- Location
- Batemans Bay, NSW, Aus
- Ride
- 08 Rocket III R.I.P now TEX Triumph Explorer
Wrecka send me a text on 0412017748 so I get your number and I will give you a call take to long to type out questions
