Oxygen sensor heater fault

[wildchild]

I hooked laptop to ECU and noticed at the bottom of the screen fault code P0031-Oxygen sensor heater short circuit to ground or open circuit. I'm not at all prepared to handle electrical matters. Anyone else experience this particular code? Any suggestions are welcomed. Thanks

 

[TURBO200R4]

check to see what they cost if not to much put one on.
if i can remember i will check mine to see how long it takes to heat up when i get home.

 

[TURBO200R4]

what i would suggest that you clear the code and see if it comes back

 

[wildchild]

what i would suggest that you clear the code and see if it comes back

Ok, and there's a clear code button to click on? I've never noticed one to be honest.

 

[wildchild]

The main relay is lit green. I presume that is bad, yes?

 

[TURBO200R4]

YOU'RE ASKING QUESTIONS THAT WILL REQUIRE a person that is more familiar with the tunecu. i looked at mine and it has a single wire (no heated sensor )

 

[wildchild]

I get a bit nervous when chit I don't know much about gets goofy. Anyhow, all is good. I cleared code last night like you suggested and checked it today, still clear. Thanks Turbo!

 

[Neville Lush]

see if the wire is melted onto the exhaust maybe.

 

[wildchild]

see if the wire is melted onto the exhaust maybe.

It's all good now, Nev. Thanks, Mate