My 2014 Roadster Build...

ROCKETHEAD

Top Fuel
Joined
May 15, 2008
Messages
1,733
Location
Yorkville, IL
Ride
2015 Triumph Trophy SE
Figured I would start a thread on my 2014 R3 Roadster Build...

Highway Pegs from my 2012 Goldwing - done

Right side is a straight bolt on, the left side clamp needs to be grounded at a 30degree angle to fit on the slanted tube in front of the gear shifter






Fuse block with relay and 6 fuse-able leads - done

ran trailer flat wiring to the front of the bike from the battery area, this gave me 3 hot leads and a ground


used a 30amp relay and tied it to rear running light, ground, battery and fuse block
4-pin-30-amp-relay-2810-p.jpg

ran 3 fuses to the block and the 3 leads going to the front of the bike, the other 3 is for future use


Garmin Zumo550 install over gauges - done
Some ram mount bits I had laying around...





Corbin Backrest with Glove-box mount to stock seat - done

made up a bracket and adjustment screw to fit the Corbin shaft...





Corbin Beetle Bags - done

Evil-Bob Chin Spoiler - done

Evil-Bob Iron Maiden bug screen - done


J&M amplified speakers - working on it

Painting of all shiny pieces flat black - underway
Dog Rack for my security system/companion - underway
Quick detach passenger seat - underway
 
Last edited:
Figured I would start a thread on my 2014 R3 Roadster Build...
Highway Pegs from my 2012 Goldwing - done
Fuse block with relay and 6 fuse-able leads - done
Garmin Zumo550 install over gauges - done
Corbin Backrest with Glove-box mount to stock seat - done
Corbin Beetle Bags - done
Evil-Bob Chin Spoiler - done
Evil-Bob Iron Maiden bug screen - done
J&M amplified speakers - working on it
Painting of all shiny pieces flat black - underway
Dog Rack for my security system/companion - underway
Quick detach passenger seat - underway

Don't worry about pics...just bring it to Colorado and show it off.
 
Kudos on all the good work. Still don't understand the reasoning for putting an evil face on such a beauty.
 
Back
Top