| » Featured Photos | by PianoMan
| by wilbur-t
| |
|  | | 
03-02-2008, 08:56 AM
| | .020 Over | | Join Date: Nov 2007
Posts: 13
| | | anyuone used the SANENG Micro-Swirl Edging?
Greetings Captains:
was looking at this SANENG Micro-Swirl Edging ( http://www.saeng.com/4000.htm) as a method of killing wind noise on my homemade windscreen for my 06 R3 Classic. getting no wind pressure and is a joy to ride behind but the wind noise is as bad as if nothing was there. has anyone used this product? if so, opinions? alternate suggestions?
thanks much...
Jeff
Portsmouth Va
2006 maroon and white R3
Last edited by wjb3805; 03-02-2008 at 08:58 AM.
|
03-02-2008, 02:22 PM
| | .060 Over | | Join Date: Sep 2007
Posts: 162
| | | Jeff,
I tried it on my Venture windshield and founf the stuff was a real PITA to slide over the windshield edge and then did nothing for me but to cost money. Fortunately they allowed a return and refund, but I didn't notice any real benefit. That thick solid black strip I also found to be very distracting when riding.
It might work in some cases, but did not work fo rme.
__________________ Dave Bel Air, MD USA- 2005 Yamaha Royal Star Tour Deluxe
- SOLD 2005 Triumph Rocket III (Cardinal Red)
- SOLD 2005 Suzuki Burgman (Silver)
|
03-02-2008, 08:07 PM
|  | Living Legend | | Join Date: Dec 2006 Location: Heart of Dixie
Posts: 2,388
| | Quote:
Originally Posted by RoadVenture  a real PITA to slide over the windshield edge and then did nothing for me but to cost money...That thick solid black strip I also found to be very distracting when riding... | What wind screen did you apply it to??
I had a Laminar Lip, aka LameLip, for awhile. It worked fairly well until the 105 degree summer heat loosened the 3M stick-on fasteners and at 90mph on the interstate it was gone instantly. They offered to replace it for 1/2 cost. No thanks 
The close up view http://www.saeng.com/4000.htm gives a good perspective of the distractingly fat appearance.
__________________
believing the US major mangled media is akin to an existence of a mushroom |
03-02-2008, 08:22 PM
|  | Living Legend | | Join Date: Jul 2006 Location: 20150 Mc Carty Rd. Deerfield, Michigan 49238
Posts: 5,354
| | I was navagating the web site and I see they have some neat lights on there. However, the price isn't neat at all. Wonder if Corbin owns them?? 
__________________ Flipmeisters Specialty Products www.flipmeisters.com
Pursuing the never ending quest for cheaper bling....... |
03-04-2008, 04:44 PM
| | .020 Over | | Join Date: Nov 2007
Posts: 13
| | | type of windscreen
Quote:
Originally Posted by HeR3tic What wind screen did you apply it to??
I had a Laminar Lip, aka LameLip, for awhile. It worked fairly well until the 105 degree summer heat loosened the 3M stick-on fasteners and at 90mph on the interstate it was gone instantly. They offered to replace it for 1/2 cost. No thanks
The close up view http://www.saeng.com/4000.htm gives a good perspective of the distractingly fat appearance. |
HeR3tic:
my screen is a "home made prototype" of 1/16th Lexan with aluminum bar and angle vertical stringers.. have a couple of ideas to try before the permanant incarnation. it is wonderful to ride behind except for the wind noise. is just a little higher than eye level which lets me cruise with my helmet shield up and still am protected. was planning on trying the SAENG trim on the next incarnation. with 2 more rebuilds, I'll still be less than half of the Triumph shield and probably more comfortable to boot. am attaching a few pics, so dont judge to harshly on this first one. BTW the verticals are no distraction at all, believe it or not... |
03-04-2008, 05:19 PM
| | Supercharged | | Join Date: May 2006
Posts: 481
| | | I've tried the standard Triumph full, summer, and fly screens, as well as an 18" WindVest. Nothing works, because most of the turbulence comes from below. I have a Clearview screen, which is 2" wider than the Triumph full screen and doesn't have cutouts on the bottom, which let air through. I also have the Triumph lower wind deflectors. As many on these forums have found, this combination is about the best you can do. The aerodynamics of the radiator and tank are for sh!t. |
03-04-2008, 07:28 PM
| | Living Legend | | Join Date: Jul 2006 Location: 20150 Mc Carty Rd. Deerfield, Michigan 49238
Posts: 5,354
| | | I too have the National Cycle/Triumph summer screen but I've found that the lowers, if canted back a bit, break the wind and provide for a relatively turbulence free ride.
__________________ Flipmeisters Specialty Products www.flipmeisters.com
Pursuing the never ending quest for cheaper bling....... |
03-05-2008, 08:09 AM
| | .060 Over | | Join Date: Sep 2007
Posts: 162
| | Quote:
Originally Posted by HeR3tic What wind screen did you apply it to?? | I tried it on a ShowChrome windshield that I had on my Venture. Difficult to appy, would not stay in place and was such a distraction that I took it off after two days.
__________________ Dave Bel Air, MD USA- 2005 Yamaha Royal Star Tour Deluxe
- SOLD 2005 Triumph Rocket III (Cardinal Red)
- SOLD 2005 Suzuki Burgman (Silver)
|
03-05-2008, 08:15 AM
| | .060 Over | | Join Date: Sep 2007
Posts: 162
| | Quote:
Originally Posted by dougl I also have the Triumph lower wind deflectors. As many on these forums have found, this combination is about the best you can do. The aerodynamics of the radiator and tank are for sh!t. | You discovered the only solution................ use the lower deflctors. Either what Triumph sells, or make your own. It does not matter what windshield you use if you still have air blasting up from under the tank. The lowers deflect a large amount of that air and let the windshield then do it's job.
__________________ Dave Bel Air, MD USA- 2005 Yamaha Royal Star Tour Deluxe
- SOLD 2005 Triumph Rocket III (Cardinal Red)
- SOLD 2005 Suzuki Burgman (Silver)
|
03-05-2008, 12:17 PM
| | Living Legend | | Join Date: Dec 2006 Location: Heart of Dixie
Posts: 2,388
| | "...am attaching a few pics, so dont judge to harshly on this first one..." Ok, I'll defer.
1/16" lexan no wonder the outside bars are necessary.
BTW, the LameLip did a fine job of eliminating the helmet vibration. It wasn't as tall a throw on the air current as expected but it did provide a relief; no teeth chatter. My Amy did find that it relieved a lot of air on her. The Triumph Lowers are a great addition if turbulence is an issue; though rising thermals of engine heat does increase in the hot summer. My solution is to never slow down 
__________________
believing the US major mangled media is akin to an existence of a mushroom | | |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
|
anyuone used the SANENG Micro-Swirl Edging?
