I've been writing to MBW Motorcycle Products requesting that they produce a set of Rear Turn Signal LED Arrays for the Rocket. They currently do not have plans to do so. My question is how many owners would consider a set if we were to show them that there is enough interest?

Below is a link to Custom Dynamics where their products are sold.

Custom Metric Cruiser LED Turn Signals

Attached Images

VTX_webpic.jpg (36.8 KB, 42 views)

You can already get a pair just fill in the order form and they will custom the color scheme
Flexible LED Arrays

look about 1/4 way down page it will give you a chart to pick your amber & red combo, they are flexable and either mount to fender or custom make a bar to bolt under fender.

Thanks, Paul. I've been emailing Custom Dynamics today about the flexible arrays. I've never fabricated anything custom like mount for these. Any idea how I would go about it. I'm not reluctant, just not experienced.

Humm good question on how best to fabricate something for the array. I will have to look at it tonight and see. You do know that the one on that sight have 3mm tape also so you can just attach to the rear fender.
I'm inteested is the array also so I will look at how I would make an adapted and get back at you.

I don't like the idea of just sticking them to the fender. I was thinking of getting a couple of al straps, paint them black, and tape them to the inside of the fender with a piece hanging just below the fender line. I would then stick the array to the strap so that they would be somewhat in line with the fender. The clear tube that holds the array would go all the way from one side to the other but would contain both left and right arrays. Do you think that the straps would hold to the inside of the fender well enough?

i am going ot have to take a look tonight. If you i use 3m I think it would hold I am just thinking about how much play and wobble it might have.. I am thinking of a bracket that bolts to were the lisence plate holder bolte to but again will have to take a look tonight.

No interest. OEM bulbs work great.

__________________
Dave
Bel Air, MD

USA

• 2005 Yamaha Royal Star Tour Deluxe
• SOLD 2005 Triumph Rocket III (Cardinal Red)
• SOLD 2005 Suzuki Burgman (Silver)

If you install led's, make sure they are aimed directly to the rear. LED's that are pointed upward are almost useless. Stand back about 20 feet behind your bike when you're done and check how visible your lights are.

The aim is important.
That's why when I modify one of our fenders for an LED I cut the slot parallel to the ground. We install Radiantz flexible strip lights with run, turn, and brake light functions.

__________________
2007 Rocket 3
2009 50th Anniversary Bonneville
2007 Suzuki M109
2003 Honda Goldwing
2002 Honda VTX 1800 pro street custom

A "set" of what?

The items listed in the first post on this thread. an LED light array for rear turn signals.